Plant Inspection Sheets


Mobile Jaw Crusher Guarding 11/12/13

Focusing on the importance of chamber guards, this single-page guidance is intended for all operators, supervisors and quarry managers. Produced by the Plant Sub-Committee of the Quarries National Joint Advisory Committee (QNJAC), the guidance addresses the BS EN Standard; the problems faced; and ways of reducing the risk of rock ejection. Particular emphasis is put on the necessity to REPLACE guards after they have been raised, removed or repaired

Engineer's Safety Inspection - Mobile Screens 4/3/13
Beyond the pre-start checks, this QNJAC guidance focuses on inspections by trained and competent inspectors/fitters at defined service intervals. The document presents a practical checklist and defect report. Once these checks have been carried out, they will enable the employer / quarry operator to have a more detailed inspection of the equipment documented.

Mobile Plant: Maintenance and Safety Daily Checks - QNJAC Guidance 7/3/12
Plant Safety Information Sheet 1 gives HSE-endorsed guidance on wheel loaders, rigid and articulated dumptrucks and Excavators Maintenance and Safety checks. The book is intended to be placed in the cab and includes a list of daily checks, instructions on defect reporting and a fault prioritisation system.

Engineer's Safety Inspection - Mobile Cone Crushers 28/2/13
Beyond the pre-start checks, this QNJAC guidance focuses on inspections by trained and competent inspectors/fitters at defined service intervals. The document presents a practical checklist and defect report. Once these checks have been carried out, they will enable the employer / quarry operator to have a more detailed inspection of the equipment documented.

Engineer's Safety Inspection - Mobile Impact Crushers 28/2/13
Beyond the pre-start checks, this QNJAC guidance focuses on inspections by trained and competent inspectors/fitters at defined service intervals. The document presents a practical checklist and defect report. Once these checks have been carried out, they will enable the employer / quarry operator to have a more detailed inspection of the equipment documented.

Engineer's Inspection - Jaw Crushers 28/2/13
Beyond the pre-start checks, this QNJAC guidance focuses on inspections by trained and competent inspectors/fitters at defined service intervals. The document presents a practical checklist and defect report. Once these checks have been carried out, they will enable the employer / quarry operator to have a more detailed inspection of the equipment documented.

Fork Lift Trucks (FLT): Maintenance and Safety Checks 3/3/13
To ensure that all vehicles operated at sites are maintained in safe condition, this QNJAC guidance comprises Pre-start checks; Daily safety checks; Defect actions & reporting; and what to do with the Reports. It is intended that the checklists be tailored to reflect site-specific needs.

MEWP: Maintenance and Safety Daily Checks - QNJAC Guidance 7/3/12
Plant Safety Information Sheet 2 gives HSE-endorsed guidance on Mobile Elevating Work Platform (MEWP)Maintenance and Safety checks. The book includes a list of daily checks, instructions on defect reporting and a fault prioritisation system

 


QNJAC is a collaboration to improve safety, efficiency, and productivity. It relies on industry expertise to come together for the mutual benefit.

Here are some of the key partners actively involved in QNJAC.

EMPI Awards

Health and Safety executive (HSE)

Institute of Quarrying (IQ)

Mineral Products Association (MPA)

Mineral Products Qualification Council (MPQC)

Minerals Matter

The British Aggregate Association (BAA)

Unite - The union

University of Derby (UoD)

For more resources, please visit SafeQuarry.com